Time zone"Timezone" and "TimeZone" redirect here. For other uses, see Time zone (disambiguation).
- For detailed information on all time zones, see List of time zones.
A time zone is a region of the Earth that has adopted the same standard time, usually referred to as the local time. Most adjacent time zones are exactly one hour apart, and by convention compute their local time as an offset from UTC (see also Greenwich Mean Time).
Standard time zones can be defined by geometrically subdividing the Earth's spheroid into 24 lunes (wedge-shaped sections), bordered by meridians each 15° of longitude apart. The local time in neighbouring zones would differ by one hour. However, political and geographical practicalities can result in irregularly-shaped zones that follow political boundaries or that change their time seasonally (as with daylight saving time), as well as being subject to occasional redefinition as political conditions change.
Before the adoption of time zones, people used local solar time (originally apparent solar time, as with a sundial; and, later, mean solar time). Mean solar time is the average over a year of apparent solar time. Its difference from apparent solar time is the equation of time.
This became increasingly awkward as railways and telecommunications improved, because clocks differed between places by an amount corresponding to the difference in their geographical longitude, which was usually not a convenient number. This problem could be solved by synchronizing the clocks in all localities, but then in many places the local time would differ markedly from the solar time to which people are accustomed. Time zones are thus a compromise, relaxing the complex geographic dependence while still allowing local time to approximate the mean solar time. There has been a general trend to push the boundaries of time zones further west of their designated meridians in order to create a permanent daylight saving time effect. The increase in worldwide communication has further increased the need for interacting parties to communicate mutually comprehensible time references to one another.
- 1 Standard time zones
- 2 History
- 3 Nautical time zones
- 4 Skewing of zones
- 5 Daylight saving time
- 6 Additional information
- 7 Internet and computer systems
- 8 Databases
- 9 See also
- 10 References
- 11 External links
Standard time zonesStandard time zones of the world as of June 2008.
Earlier, time zones based their time on Greenwich Mean Time (GMT, also called UT1), the mean solar time at longitude 0° (the Prime Meridian). But as a mean solar time, GMT is defined by the rotation of the Earth, which is not constant in rate. So, the rate of atomic clocks was annually changed or steered to closely match GMT. But on January 1, 1972 it became fixed, using predefined leap seconds instead of rate changes. This new time system is Coordinated Universal Time (UTC). Leap seconds are inserted to keep UTC within 0.9 seconds of UT1. In this way, local times continue to correspond approximately to mean solar time, while the effects of variations in Earth's rotation rate are confined to simple step changes that can be easily subtracted if a uniform time scale (International Atomic Time or TAI) is desired. With the implementation of UTC, nations began to use it in the definition of their time zones instead of GMT. As of 2005, most but not all nations have altered the definition of local time in this way (though many media outlets fail to make a distinction between GMT and UTC). Further change to the basis of time zones may occur if proposals to abandon leap seconds succeed.
Due to daylight saving time, UTC is local time at the Royal Observatory, Greenwich only between 01:00 UTC on the last Sunday in October and 01:00 UTC on the last Sunday in March. For the rest of the year, local time there is UTC+1, known in the United Kingdom as British Summer Time (BST). Similar circumstances apply in many places.
The definition for time zones can be written in short form as UTC±n (or GMT±n), where n is the offset in hours. These examples give the local time at various locations at 12:00 UTC when daylight saving time (or summer time, etc.) is not in effect:
- Los Angeles, California, United States: UTC−8; 04:00
- Saint John, New Brunswick, Canada: UTC−4; 08:00
- New York City, New York, United States: UTC−5; 07:00
- Paris, France : UTC+1; 13:00
- Cape Town, South Africa: UTC+2; 14:00
- New Delhi, India: UTC+5:30; 17:30
- Jakarta, Indonesia : UTC+7; 19:00
- Seoul, Korea: UTC+9; 21:00
- Melbourne, Australia: UTC+10; 22:00
Where the adjustment for time zones results in a time at the other side of midnight from UTC, then the date at the location is one day later or earlier. Some examples when UTC is 23:00 on Monday when daylight saving time is not in effect:
Some examples when UTC is 02:00 on Tuesday when daylight saving time is not in effect:
- New York City, New York, United States: UTC−5; 21:00 on Monday
- Honolulu, Hawaii, United States: UTC−10; 16:00 on Monday
The time-zone adjustment for a specific location may vary because of daylight saving time. For example New Zealand, which is usually UTC+12, observes a one-hour daylight saving time adjustment during the southern hemisphere summer, resulting in a local time of UTC+13.
- See also: Sidereal time
Greenwich Mean Time (GMT) was established in 1675 when the Royal Observatory was built, as an aid to determine longitude at sea by mariners. The first time zone in the world was established by British railways on December 1, 1847 — with GMT hand-carried on chronometers. This quickly became known as Railway Time. About August 23, 1852, time signals were first transmitted by telegraph from the Royal Observatory, Greenwich. Even though 98% of Great Britain's public clocks were using GMT by 1855, it was not made Britain's legal time until August 2, 1880. Some old clocks from this period have two minute hands — one for the local time, one for GMT. This only applied to the island of Great Britain, and not to the island of Ireland.
On November 2, 1868, New Zealand (then a British colony) officially adopted a standard time to be observed throughout the colony, and was perhaps the first country to do so. It was based on the longitude 172°30′ East of Greenwich, that is 11 hours 30 minutes ahead of GMT. This standard was known as New Zealand Mean Time.
Timekeeping on the American railroads in the mid nineteenth century was somewhat confused. Each railroad used its own standard time, usually based on the local time of its headquarters or most important terminus, and the railroad's train schedules were published using its own time. Some major railroad junctions served by several different railroads had a separate clock for each railroad, each showing a different time; the main station in Pittsburgh, Pennsylvania, for example, kept six different times. The confusion for travelers making a long journey involving several changes of train can be imagined.
Charles F. Dowd proposed a system of one-hour standard time zones for American railroads about 1863, although he published nothing on the matter at that time and did not consult railroad officials until 1869. In 1870, he proposed four ideal time zones (having north–south borders), the first centered on Washington, D.C., but by 1872 the first was centered 75°W of Greenwich, with geographic borders (for example, sections of the Appalachian Mountains). Dowd's system was never accepted by American railroads. Instead, U.S. and Canadian railroads implemented a version proposed William F. Allen, the editor of the Traveler's Official Railway Guide. The borders of its time zones ran through railroad stations, often in major cities. For example, the border between its Eastern and Central time zones ran through Detroit, Buffalo, Pittsburgh, Atlanta, and Charleston. It was adopted on Sunday, November 18, 1883, also called "The Day of Two Noons", when each railroad station clock was reset as standard-time noon was reached within each time zone. The zones were named Intercolonial, Eastern, Central, Mountain, and Pacific. Within one year, 85% of all cities with populations over 10,000, about 200 cities, were using standard time. A notable exception was Detroit (which is about half-way between the meridians of eastern time and central time), which kept local time until 1900, then tried Central Standard Time, local mean time, and Eastern Standard Time before a May 1915 ordinance settled on EST and was ratified by popular vote in August 1916. This hodgepodge ended when Standard zone time was formally adopted by the U.S. Congress on 19 March 1918 as the Standard Time Act.
Time zones were first proposed for the entire world by Canada's Sir Sandford Fleming in 1876 as an appendage to the single 24-hour clock he proposed for the entire world (located at the center of the Earth and not linked to any surface meridian). In 1879 he specified that his universal day would begin at the anti-meridian of Greenwich (now called 180°), while conceding that hourly time zones might have some limited local use. He continued to advocate his system at subsequent international conferences. In October 1884, the International Meridian Conference did not adopt his time zones because they were not within its purview. The conference did adopt a universal day of 24 hours beginning at Greenwich midnight, but specified that it "shall not interfere with the use of local or standard time where desirable".
Nevertheless, most major countries had adopted hourly time zones by 1929. Today, all nations use standard time zones for secular purposes, but they do not all apply the concept as originally conceived. Newfoundland, India, Iran, Afghanistan, Venezuela, Burma, the Marquesas, as well as parts of Australia use half-hour deviations from standard time, and some nations, such as Nepal, and some provinces, such as the Chatham Islands, use quarter-hour deviations. Some countries, most notably China, use a single timezone even though the extent of their territory far exceeds 15° of longitude.
Nautical time zones
- Main article: Nautical time
Since the 1920s a nautical standard time system has been in operation for ships on the high seas. Nautical time zones are an ideal form of the terrestrial time zone system. Under the system, a time change of one hour is required for each change of longitude by 15°. The 15° gore that is offset from GMT or UT1 (not UTC) by twelve hours is bisected by the nautical date line into two 7.5° gores that differ from GMT by ±12 hours. A nautical date line is implied but not explicitly drawn on time zone maps. It follows the 180th meridian except where it is interrupted by territorial waters adjacent to land, forming gaps: it is a pole-to-pole dashed line.
A ship within the territorial waters of any nation would use that nation's standard time, but would revert to nautical standard time upon leaving its territorial waters. The captain was permitted to change the ship's clocks at a time of the captain’s choice following the ship's entry into another time zone. The captain often chooses midnight.
For airplanes, similar principles apply.
Skewing of zonesDifference between sun time and clock time during daylight saving time: 0h ± 30m 1h ± 30m ahead 2h ± 30m ahead 3h ± 30m ahead
Ideal time zones, such as nautical time zones, are based on the mean solar time of a particular meridian located in the middle of that zone with boundaries located 7.5 degrees east and west of the meridian. In practice, zone boundaries are often drawn much farther to the west with often irregular boundaries, and some locations base their time on meridians located far to the east.
For example, even though the Prime Meridian (0°) passes through Spain and France, they use the mean solar time of 15 degrees east (Central European Time) rather than 0 degrees (Greenwich Mean Time). France previously used GMT, but it was switched to CET during the German Occupation and did not switch back after the war.
There is a tendency to draw time zone boundaries far to the west of their meridians. Many of these locations also use daylight saving time which means that solar noon could occur later than 14:00 by the clock.
In a more extreme example, Nome, Alaska is at 165°24′W longitude, which is just west of center of the idealized Samoa Time Zone (165°W). Nevertheless, Nome observes Alaska Time (135°W) with DST so it is slightly more than two hours ahead of the sun in winter and over three in summer. Kotzebue, Alaska, also near the same meridian but north of the Arctic Circle, has an annual event on the Ninth of August to celebrate two sunsets the same day, one shortly after midnight and the other shortly before midnight.
Daylight saving timeDST used DST no longer used DST never used
- Main article: Daylight saving time
Many countries, or even parts of countries, adopt daylight saving time during part of the year. This typically involves advancing clocks by an hour near the start of spring and adjusting back in autumn. Some countries also use backward daylight saving over the winter period. Modern DST was first proposed in 1907 and was widespread use in 1916 as a wartime measure aimed at conserving coal. Despite controversy, many countries have used it since then; details vary by location and change occasionally.
- Russia has eleven time zones, including Kaliningrad on the Baltic Sea. France also has eleven time zones including those of France, French Guiana and numerous islands, inhabited and uninhabited. The United States has ten time zones (nine official plus that for Wake Island and its Antarctic stations). Australia has nine time zones (one unofficial and three official on the mainland plus four for its territories and one more for an Antarctic station not included in other time zones). The United Kingdom has eight time zones for itself and its overseas islands. Canada has six official time zones.
- In terms of area, China is the largest country with only one time zone (UTC+8). Before the Communist control of the mainland in 1949 during the Chinese Civil War, China was separated into five time zones. China also has the widest spanning time zone.
- Stations in Antarctica generally keep the time of their supply bases, thus both the Amundsen-Scott South Pole Station (U.S.) and McMurdo Station (U.S.) use New Zealand time (UTC+12 southern winter, UTC+13 southern summer).
- The 27° N latitude passes back and forth across time zones in South Asia. Pakistan: +5, India +5:30, Nepal +5:45, India (Sikkim) +5:30, China +8:00, Bhutan +6:00, India (Arunachal Pradesh) +5:30, Myanmar +6:30. This switching was more odd in 2002, when Pakistan enabled daylight saving time. Thus from west to east, time zones were: +6:00, +5:30, +5:45, +5:30, +8:00, +6:00, +5:30 and +6:30.
- Because the earliest and latest time zones are 26 hours apart, any given calendar date exists at some point on the globe for 50 hours. For example, April 11 begins in time zone UTC+14 at 10:00 UTC April 10, and ends in time zone UTC-12 at 12:00 UTC April 12.
- There are numerous places where several time zones meet, for instance at the tri-country border of Finland, Norway and Russia.
- There are 40 time zones instead of 24 (as popularly believed). This is due to fractional hour offsets and zones with offsets larger than 12 hours near the International Date Line as well as one unofficial zone in Australia.
- The largest time gap along a political border is the 3.5 hour gap along the border of China (UTC +8) and Afghanistan (UTC+4:30).
- One of the most unusual time zones is the Australian Central Western Time zone (CWST), which is a small strip of Western Australia from the border of South Australia west to E125.5°, just before Caiguna. It is 8¾ hours ahead of UTC (UTC+8:45) and covers an area of about 35,000 km², larger than Belgium, but has a population of about 200. Although unofficial, it is universally respected in the area--as without it, the time gap in standard time at E129° (the WA/SA border) would be 1.5 hours. See Time in Australia.
Internet and computer systems
The format is based in the W3C Note "datetime".
On the other hand, most modern computer operating systems include information about time zones, including the capability to automatically change the local time when daylight saving starts and finishes (see the article on daylight saving time for more details on this aspect).
The protocol used the most to synchronize time with multiple sources across the internet is Network Time Protocol (NTP). It operates across multiple platforms and there are a wide array of public servers available on the internet to synchronize with. Every server is normally kept updated with an atomic clock belonging to the standards institution of each country. Normally a large organization has an internal server to keep time with one of the public NTP servers on the internet, and then this server acts as a proxy and becomes the official timekeeper for all organization machines. NTP is so popular now that virtually all IP-capable devices implement some degree of NTP client software.
- Main article: Unix time
Most Unix-like systems, including Linux and Mac OS X, keep system time as UTC (Coordinated Universal Time). Rather than having a single timezone set for the whole computer, timezone offsets can vary for different processes. Standard library routines are used to calculate the local time based on the current timezone, normally supplied to processes through the TZ environment variable. This allows users in multiple timezones to use the same computer, with their respective local times displayed correctly to each user. Timezone information is most commonly stored in a timezone database known as zoneinfo (or sometimes tz or Olson format). In fact, many systems, including anything using the GNU C Library, can make use of this database.
Windows based computer systems normally keep system time as local time in a particular time zone. A system database of timezone information includes the offset from UTC and rules that indicate the start and end dates for daylight saving in each zone. Application software is able to calculate the time in various zones, but there is no standard way for users from multiple zones to use a single server and have their own local time presented to them other than with Windows 2003 Terminal Server. Windows 2003 Terminal Servers allow remote computers to redirect their time zone settings to the Terminal Server so that users see the correct time for their time zone in their desktop/application sessions. Terminal Services uses the server base time on the Terminal Server and the client time zone information to calculate the time in the session. It shoud be noted that by default, this feature is disabled.
Each Smalltalk dialect comes with its own built-in classes for dates, times and timestamps, only a few of which implement the DateAndTime and Duration classes as specified by the ANSI Smalltalk Standard. VisualWorks provides a TimeZone class that supports up to 2 annually-recurring offset transitions, which are assumed to apply to all years (same behavior as Windows time zones.) Squeak provides a Timezone class that does not support any offset transitions. Dolphin Smalltalk does not support time zones at all.
For full support of the Olson Time Zone Database (zoneinfo) in a Smalltalk application (including support for any number of annually-recurring offset transitions, and support for different intra-year offset transition rules in different years) the third-party, open-source, ANSI-Smalltalk-compliant Chronos Date/Time Library is available for use with any of the following Smalltalk dialects: VisualWorks, Squeak or Dolphin.
While most application software will use the underlying operating system for timezone information, the Java Platform, from version 1.3.1, has maintained its own timezone database. This database will need to be updated whenever timezone rules change. Sun provides a Timezone Updater Tool for this purpose.
As an alternative to the timezone information bundled with the Java Platform, programmers may choose to use the Joda-Time library. This library includes its own timezone data based on the frequently-updated tz database.
The standard module datetime stores and operates on the timezone information class tzinfo. The third party pytz module provides access to the full zoneinfo database.
- TIMESTAMP WITH TIME ZONE
- TIMESTAMP WITHOUT TIME ZONE
However the standard has a somewhat naive understanding of time zones. It generally assumes a time zone can be specified by a simple offset from GMT. This causes problems when trying to do arithmetic on dates which span daylight saving time transitions or which span political changes in time zone rules.
Oracle Database is configured with a database time zone, and connecting clients are configured with session time zones. Oracle Database uses two data types to store time zone information:
- TIMESTAMP WITH TIME ZONE
- Stores date and time information with the offset from UTC
- TIMESTAMP WITH LOCAL TIME ZONE
- Stores date and time information with respect to the dbtimezone (which cannot be changed so long as there is a column in the db of this type), automatically adjusting the date and time from the stored time zone to the client's session time zone.
- TIMESTAMP WITH TIME ZONE
- Stores date and time in UTC and converts to the client's local time zone (which could be different for each client) for display purposes.
- TIMESTAMP WITHOUT TIME ZONE
- Stores date and time without any conversion on input or output.
- ^ Bristol Time
- ^ Economics of Time ZonesPDF (1.89 MiB)
- ^ Doug O'Hara (2007-03-11). Alaska: daylight stealing time. Far North Science. Retrieved on 2007-05-11.
- Bowditch, Nathaniel. American Practical Navigator. Washington: Government Printing Office, 1925, 1939, 1975.
- Hill, John C., Thomas F. Utegaard, Gerard Riordan. Dutton's Navigation and Piloting. Annapolis: United States Naval Institute, 1958.
- Howse, Derek. Greenwich Time and the Discovery of the Longitude. Oxford: Oxford University Press, 1980. ISBN 0-19-215948-8.
- Palin, Michael. Pole to Pole. Bay Books, 1995. ISBN 0-912333-41-3.
- The tz database List of links about time zones, none link to tz directly.
- US Official Time Clock - Java enabled clock to graphically display night and day around the globe.
- Date and Time Gateway - Get current time in major cities
- W3C Note Datetime.
Deep time · History · Past · Present · Future · Futurology
Time PortalMeasurement and StandardsChronometry · UTC · UT · TAI · Second · Minute · Hour · Sidereal time · Solar time · Time zone
Intercalation · Leap second · Leap yearChronologyAstronomical chronology · Geologic Time · Geological history · Geochronology · Archaeological dating
Calendar era · Regnal year · Chronicle · Timeline · PeriodizationReligion and Mythology Time and fate deities · Wheel of time · Kāla · Kalachakra · Prophecy · DreamtimePhilosophyCausality · Eternalism · Eternal return · Event · The Unreality of Time · A-series and B-series · B-Theory of time
Endurantism · Four dimensionalism · Perdurantism · Presentism · Temporal finitism · Temporal partsPhysical Sciences Time in physics · Spacetime · Absolute time and space · T-symmetry
Theory of relativity · Time dilation · Gravitational time dilation · Coordinate time · Proper timePsychology Consciousness and spacetime · Mental chronometry · Reaction time · Sense of time · Specious presentSociology and Anthropology Futures studies · Long Now Foundation · Time discipline · Time use researchEconomics Newtonian time in economics · Time value of moneyRelated topics Space · Duration · Time capsule · Time travel · Time signature · System time · Carpe diem · Tempus fugit
Time PortalInternational standards UTC · UT · TAI · ISO 31-1 · Second · DUT1 · Leap second · IERS
International Date Line · Solar time · Time zone · Daylight saving time · Time offset · AnnumObsolete standards Ephemeris time · Barycentric Dynamical Time · Greenwich Mean Time · Prime MeridianTime in physicsSpacetime · Chronon · Cosmological decade · Planck epoch · Planck time · T-symmetry
Time domain · Continuous time · Discrete time · Absolute time and spaceHorologyClock · Astrarium · Atomic clock · Hourglass · Marine chronometer · Radio clock · Sundial · Watch · Water clock
History of timekeeping devices · Equation of time · ComplicationCalendarDay · Week · Month · Year · Decade · Century · Millennium
Tropical year · Equinox · Solstice · Days of the week · Calculating the day of the week · Dominical letterArchaeology & geology International Commission on Stratigraphy · Geologic Time · Archaeological datingAstronomical chronologyNuclear time scale · Precession · Sidereal time · Galactic yearUnusual units Fortnight · Jiffy · Lustrum · Saeculum · Shake · TideRelated topics Chronology · Duration · System time · Mental chronometry · Time value of money · Timekeeper
Link former page on this page
Related word on this page